ДИНАМІЧНА МОДЕЛЬ ГІДРАВЛІЧНОГО ПРИВОДУ МЕХАТРОННОЇ СИСТЕМИ З ПЛАНЕТАРНИМ ГІДРОМОТОРОМ

Автор(и)

DOI:

https://doi.org/10.32782/1994-4691-2026-1-77-3

Ключові слова:

перехідні процеси, розгін гідроприводу, тиск, крутний момент, витрата робочої рідини, частота обертання

Анотація

У статті узагальнено результати розрахункових досліджень динамічних характеристик гідроприводу мехатронної системи із серійним і модернізованим планетарними гідромоторами. Мета роботи – зіставити вплив конструкції гідромотора, зовнішніх збурень і пасивного гасіння пульсацій на перехідні процеси гідроприводу. В аналізі враховано площу прохідного перерізу розподільної системи, діаметральний зазор між роторами, нерівномірність подачі насоса та зміну моменту опору. Розглянуто три випадки: постійні подача насоса й момент опору, змінні зовнішні впливи та робота з пасивним гасником пульсацій. Зміна площі прохідного перерізу розподільної системи супроводжується пульсаціями тиску й витрати робочої рідини, а зміна діаметрального зазору — коливаннями крутного моменту. За змінних зовнішніх впливів модернізований гідромотор характеризується меншими коливаннями тиску й крутного моменту та раніше досягає робочого рівня частоти обертання порівняно із серійним. У випадку застосування пасивного гасника пульсацій об’ємом 5000 см³ пускові максимуми тиску становлять приблизно 38 і 36 МПа для серійного та модернізованого гідромоторів відповідно, порівняно з 90 і 85 МПа без гасника. Пускові максимуми крутного моменту перебувають у межах 900–1000 Н·м для обох конструкцій, порівняно з приблизно 2100 і 1900 Н·м без гасника. Водночас коливання за змінного навантаження зберігаються в обох конструкцій. Результати обґрунтовують доцільність спільного розгляду конструктивного вдосконалення гідромотора та пасивного демпфування під час вибору заходів зі зменшення пульсацій і пускових навантажень. Числові оцінки стосуються розглянутих випадків з урахуванням відмінностей їхніх вихідних параметрів та умов роботи.

Посилання

Panchenko A., Voloshina A., Kiurchev S., Titova O., Onopreychuk D., Stefanov V., Safoniuk I., Pashchenko V., Radionov H., Golubok M. Development of the universal model of mechatronic system with a hydraulic drive. Eastern-European Journal of Enterprise Technologies. 2018. 4 (7(94)). 51–60. https://doi.org/10.15587/1729-4061.2018.139577

Panchenko A., Voloshina A., Titova O., Panchenko I., Zasiadko A. The Study of Dynamic Processes of Mechatronic Systems with Planetary Hydraulic Motors. InterPartner 2020: Advanced Manufacturing Processes II. LNME. Springer, Cham, 2021. 704–713. https://doi.org/10.1007/978-3-030-68014-5_68

Kyurchev V., Kiurchev S., Rezvaya K., Pastushenko A., Głowacki S. Experimental Evaluation of the Impact of the Diametral Clearance on Output Characteristics of a Planetary Hydraulic Motor. DSMIE 2023: Advances in Design, Simulation and Manufacturing VI. LNME. Springer, Cham, 2023. 84–94. https://doi.org/10.1007/978-3-031-32774-2_9

Kiurchev S., Luzan P., Zasiadko A., Radionov H., Boltianska N. Influence of the flow area of distribution systems on changing the operating parameters of planetary hydraulic motors. IOP Conference Series: Materials Science and Engineering, 2021. 1021. 012037. https://doi.org/10.1088/1757-899X/1021/1/012037

Hutsol T. European Green Deal: Improving the Efficiency of Using Planetary Hydraulic Machines. Energies, 2023. 16 (18). 6481. https://doi.org/10.3390/en16186481.

Yeremenko, O., Abdullo, M. A., Boltianska, N., Mikhalchenko, S., Verkholantseva, V. Reducing the Pulsation of the Working Fluid in Planetary Hydraulic Machines by Rational Design of Their Distribution Systems. DSMIE 2022: Advances in Design, Simulation and Manufacturing V. LNME. Springer, Cham, 2, 133-143 (2022). https://doi.org/10.1007/978-3-031-06044-1_13

Voloshina A, Panchenko A, Titova O, Panchenko I. Changes in the dynamics of the output characteristics of mechatronic systems with planetary hydraulic motors. Journal of Physics: Conference Series, 2021. Vol. 1741. 012045. https://doi.org/10.1088/1742-6596/1741/1/012045

Panchenko, A., Voloshina, A., Sadullozoda, S. S., Boltyansky, O., Panina, V.: Influence of the Design Features of Orbital Hydraulic Motors on the Change in the Dynamic Characteristics of Hydraulic Drives. DSMIE 2022: Advances in Design, Simulation and Manufacturing V. LNME. Springer, Cham, 2022. 2. 101–111. https://doi.org/10.1007/978-3-031-06044-1_10

Kiurchev S., Kyurchev V., Fatyeyev A., Tynyanova I., Mudryk K. Influence of the Radius of Curvature of the Teeth on the Geometric and Functional Parameters of the Rotors of the Planetary Hydraulic Motor. Interpartner 2023: Advanced Manufacturing Processes V. LNME. Springer, Cham, 2023. 450–461. https://doi.org/10.1007/978-3-031-42778-7_42.

Kiurchev S., Kyurchev V., Radkevych O., Fatyeyev O., Hrechka I. Monitoring the Accuracy of Manufacturing Elements of the End Distribution System of a Hydraulic Motor Planetary Type. Interpartner 2024: Advanced Manufacturing Processes VI. LNME. Springer, Cham, 2025. 712–723. https://doi.org/10.1007/978-3-031-82746-4_63

Wang Y., Shen T., Tan C., Fu J., Guo S. et al. Research Status, Critical Technologies, and Development Trends of Hydraulic Pressure Pulsation Attenuator. Chinese Journal of Mechanical Engineering. 2021. 34. 14. https://doi.org/10.1186/s10033-021-00532-z.

Eyres R. D., Champneys A. R., Lieven N. A. J. Modelling and Dynamic Response of a Damper with Relief Valve. Nonlinear Dynamics. 2005. 40 (2). 119–147. https://doi.org/10.1007/s11071-005-4144-6

Li D., Liu Y., Gong J., Wang T. Design of a Noncircular Planetary Gear Mechanism for Hydraulic Motor. Mathematical Problems in Engineering. 2021. 5510521. 1–9. https://doi.org/10.1155/2021/5510521

Panchenko, A., Voloshina, A., Fatyeyev A., Tynyanova I. and Mudryk K. Stabilization of the Transient Dynamic Characteristics for a Hydraulic Drive with a Planetary Hydraulic Motor. DSMIE 2023: Advances in Design, Simulation and Manufacturing VI. LNME. Springer, Cham, 2023. 2. 95–105. https://doi.org/10.1007/978-3-031-32774-2_10

Dasgupta K., Mandal S. K., Pan S. Dynamic analysis of a low speed high torque hydrostatic drive using steady-state characteristics. Mechanism and Machine Theory. 2012. 52. 1–17. https://doi.org/10.1016/j.mechmachtheory.2011.12.004

Zeman P., Kemmetmüller W., Kugi A. Mathematical Modeling and Analysis of a Hydrostatic Drive Train. IFAC-PapersOnLine. 2015. 48 (1). 508–513. https://doi.org/10.1016/j.ifacol.2015.05.064

Li C., Jiang T., Liu C., Xu H., Shi G. Investigation of the leakage in the flow distribution pair of radial piston hydraulic motors through CFD analysis and experiments. Flow Measurement and Instrumentation. 2024. 96. 102555. https://doi.org/10.1016/j.flowmeasinst.2024.102555

Kyurchev, V., Kiurchev, S., Rezvaya, K., Fatyeyev, A., Głowacki, S. Assessing the Reliability of a Mathematical Model of Working Processes Occurring in a Hydraulic Drive. DSMIE 2024: Advances in Design, Simulation and Manufacturing VII. LNME. Springer, Cham, 2024. https://doi.org/10.1007/978-3-031-63720-9_24

Ghoshal S. K., Pandey A. K , Dasgupta K., Bhola M. A segmental pump-motor control scheme to attain targeted speed under varying load demand of a hydraulic drive used in heavy earth movers. Mechatronics. 2021. 80. 102681. https://doi.org/10.1016/j.mechatronics.2021.102681

Gaheen O. A., Aziz M.A., Benini E. Experimental and modeled response of hydraulic motors under pulsating flow. Engineering Science and Technology, an International Journal. 2025. 72. 102234. https://doi.org/10.1016/j.jestch.2025.102234.

Fang Y., Yang H., Zhang G. et al.Multi-interface fusion speed pulsation model and behavior analysis for high-torque hydraulic motors. Flow Measurement and Instrumentation. 2026. 108. 103148. https://doi.org/10.1016/j.flowmeasinst.2025.103148

Grimaldi K., Najjaran A., Ma Z., Bao H., Roskilly T. Dynamic Modelling and Experimental Validation of a Pneumatic Radial Piston Motor. Energies, 2023. 16 (4). 1954. https://doi.org/10.3390/en16041954

Kojima E., Yamada T., Narikawa H., Moriyama K. A Simulation Model of the Delivery Flow Ripple produced by a Hydraulic Axial Piston Pump. Transactions of the Japan Hydraulics & Pneumatics Society. 1998. Vol. 29, No. 4. P. 100–106. https://doi.org/10.14888/jfps1998.29.100

Casoli P., Gherardini F., Campanini F. Active Pressure Ripple Control in Axial Piston Pumps through High-Frequency Swash Plate Oscillations – A Theoretical Analysis. Energies. 2019. 12 (7). 1377. https://doi.org/10.3390/en12071377.

Kojima E., Shinada M. Characteristics of Fluidborne Noise Generated by a Fluid Power Pump: 4th Report, Pressure Ripple in Hydrostatic Power Transmission. Journal of the Japan Society of Mechanical Engineers. 1986. 29 (258). 4147–4155. https://doi.org/10.1299/jsme1958.29.4147

Johnston D. N., Edge K. A. Simulation of the Pressure Ripple Characteristics of Hydraulic Circuits. Proceedings of the Institution of Mechanical Engineers, Part I. 1989. 203 (4). https://doi.org/10.1243/PIME_PROC_1989_203_114_02

Dindorf R., Takosoglu J., Wos P. Review of Hydro-Pneumatic Accumulator Models for the Study of the Energy Efficiency of Hydraulic Systems. Energies. 2023. 16 (18). 6472. https://doi.org/10.3390/en16186472.

Ray A. Dynamic modeling and simulation of a relief valve. Simulation. 1978. 31 (5). https://doi.org/10.1177/003754977803100504

Song W., Yang C. Mathematical Modelling and Dynamic Analysis of a Direct-Acting Relief Valve Based on Fluid-Structure Coupling Analysis. Shock and Vibration. 2021. 5581684. https://doi.org/10.1155/2021/5581684

Panchenko A. I., Voloshyna A. A., Rozhniatovskyi V. V., Zasiadko A. I. Model hidravlichnoho pryvodu mekhatronnoi systemy z planetarnym hidromotorom. Promyslova hidravlika i pnevmatyka, 2024. № 2(74). S. 12–32. https://doi.org/10.32782/1994-4691-2024-2-74-2

##submission.downloads##

Опубліковано

2026-11-04