FUNCTIONAL INDIVIDUAL TOOL FOR PREPARING ELECTRICAL TOOL WIRES DURING INSTALLATION OF ELECTRICAL EQUIPMENT AND REPAIR OF ELECTRICAL APPLIANCES

Keywords: insulation stripper, side cutters, pliers, knife with interchangeable blades, crimpers, crimping tool, installation, repair, conductors, tips, cross-section diameter, quality.

Abstract

Compliance with the required quality during installation and repair work requires a comprehensive approach from the owner or staff. This approach is based simultaneously on the use of modern professional tools and materials, the quality and functional tasks of which are justified by the time and conditions of use. Materials for installation work differ by purpose, type, manufacturer's brands, cost, etc. If we talk about the topic of this publication, such materials are conductors of electric current in the form of wires, as well as tips of various shapes and sizes. The use of the latter significantly improves the quality of installation work, gives the assembled control panel a relatively aesthetic appearance, and the personnel - much more comfortable conditions when performing direct clamping of conductors in certain contacts of electrical devices. High-quality performance of installation work is possible with the use of modern equipment and tools. Drawing parallels with the tool that specialists used a few decades ago and what they use now, it becomes clear a significant step forward in terms of comfort for personnel and comparatively better performance of tasks. This article presents an analysis of the functional features of several tools for preparing conductors for installation. Such tools include: insulation strippers, side cutters, pliers, knives with removable blades, etc. It has been established that a relatively high-quality installation is possible with the use of a professional tool, including a multifunctional one. A comprehensive approach in the performance of all appropriate operations makes it possible to obtain conductors with tips of the required shape, size and configuration. The effectiveness of using a modern tool is fully justified. The advantages of carrying out installation work with the pressing of conductors are presented. This work confirms the effectiveness of using a professional multifunctional tool for preparing conductors for installation. It was established that due to the use of one, but multifunctional tool, it is possible to perform a complete technology of wire preparation for installation in an electrical control panel.

References

1. Юрченко О. Ю., Барсукова Г .В., Чепіжний А. В., Тимошенко Г.А. Монтаж електрообладнання і систем керування. Монтаж щитів керування електричними двигунами: навч.-метод. посібник для здобувачів освіти 2, 1 с.т. курсів спеціальності:«Електроенергетика, електротехніка та електромеханіка» інженерно-технологічного факультету денної та заочної форми навчання, СВО «бакалавр». Суми: СНАУ, 2023. 144 с.
2. Rajak A. K., Kore S. D. Numerical simulation and experimental study on electromagnetic crimping of aluminium terminal to copper wire strands. Electric Power Systems Research. 2017. https://doi.org/10.1016/j.epsr.2017.08.014.
3. Rajak A. K., Kore S. D. Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process. Journal of Manufacturing Processes. 2017. Vol. 26. P. 57–66. https://doi.org/10.1016/j.jmapro.2017.01.009.
4. Olbrich S., Lackinger J. Manufacturing Processes of automotive high-voltage wire harnesses: State of the art, current challenges and fields of action to reach a higher level of automation. Procedia CIRP. 2022. https://doi.org/10.1016/j.procir.2022.05.041.
5. Trommnau J., Kühnle J. U., Siegert J., Inderka R.B., Bauernhansl T. Overview of the State of the Art in the Production Process of Automotive Wire Harnesses, Current Research and Future Trends. Procedia CIRP. 2019. https://doi.org/10.1016/j.procir.2019.03.067.
6. Aguirre E., Ferrière L., Raucent, B. Robotic assembly of wire harnesses: Economic and technical justification. Journal of Manufacturing Systems. 1997. Vol. 16. P. 220–231. https://doi.org/10.1016/S0278-6125(97)88890-5.
7. Lokanath S. V., Skarbek B., Schindelholz E. J. Degradation Processes and Mechanisms of PV Wires and Connectors. Durability and Reliability of Polymers and Other Materials in Photovoltaic Modules. 2019. https://doi.org/10.1016/B978-0-12-811545-9.00009-4.
8. Riba J., Liu Y. & Moreno-Eguilaz M. Analyzing the role of emissivity in stranded conductors for overhead power lines. International Journal of Electrical Power & Energy Systems. 2024. https://doi.org/10.1016/j.ijepes.2024.110027.
9. Sumption M. D., Murphy J. P., Susner M. A. & Haugan T. J. Performance metrics of electrical conductors for aerospace cryogenic motors, generators, and transmission cables. Cryogenics. 2020. Vol.111. P. 103171. https://doi.org/10.1016/j.cryogenics.2020.103171.
10. Turck B. Effect of the respective positions of filament bundles and stabilizing copper on coupling losses in superconducting composites. Cryogenics. 1982. Vol. 22. P. 466-468. https://doi.org/10.1016/0011-2275(82)90131-X.
11. Barnes P. N., Sumption M. D. & Rhoads G. L. Review of high power density superconducting generators: Present state and prospects for incorporating YBCO windings. Cryogenics. 2005. Vol. 45. P. 670-686. https://doi.org/10.1016/j.cryogenics.2005.09.001.
12. B. Smyrak. Analysis of the quality of aluminum overhead conductors after 30 years of operation. Engineering Failure Analysis. 2023.e107600. https://doi.org/10.1016/j.engfailanal.
13. Liu X., Sun L., Dong C., Wang J., Chang G., Liang J., Zhu Z., Xia Y., Jin L. & Gao H. Stretchable conductors based on nanoporous Ag for flexible sensors. Composites Communications. 2024. e101887. https://doi.org/10.1016/j.coco.2024.101887.
14. Huang Z., Tan Y., He R., Xie Y., Wang G., Wei J., Wang Y. & Wu Q. Study on the Electrical Performances of Soldered Joints between HTS Coated-Conductors. Cryogenics. 2022. e103422. https://doi.org/10.1016/j.cryogenics.2022.103422.
15. Queral V., Cabrera S., Rincón E., Barbarias E., Santos F. & Gutierrez J. M. Embedded conductors in solidified molten metal for winding packs for high-field stellarators. Fusion Engineering and Design. 2023. e113495. https://doi.org/10.1016/j.fusengdes.2023.113495.
Published
2024-11-11
How to Cite
Юрченко, О., Барсукова, Г., & Романенко, М. (2024). FUNCTIONAL INDIVIDUAL TOOL FOR PREPARING ELECTRICAL TOOL WIRES DURING INSTALLATION OF ELECTRICAL EQUIPMENT AND REPAIR OF ELECTRICAL APPLIANCES. Scientific Bulletin of the Tavria State Agrotechnological University, 14(1). https://doi.org/10.32782/2220-8674-2024-24-1-23
Section
Електроенергетика, електротехніка та електромеханіка